fbpx

Installers Pack CLICK Insert – Pack of 5

$122.00$165.00

Say GOODBYE to bulky, ugly pole adapters and get yourself a CLICK Metal Starlink Insert.

If you want a sleek looking Starlink install and have an existing satellite mount on your roof, check out these metal click inserts for the Starlink dish.

Two CLICK Starlink insert sizes available for poles with internal diameters of:

  1. 40mm (Hills Style) Metal Insert or,
  2. 38mm (Jonsa, Matchmaster Style) 

 

SKU: MetalInsert-5Pack Category: Tag:

Description

Installers 5 Pack – CLICK Metal Starlink Pole Inserts

Say GOODBYE to bulky, ugly pole adapters and get yourself a CLICK Metal Starlink Insert.

If you want a sleek looking Starlink install and have an existing satellite mount on your roof, check out these metal click inserts for the Starlink dish.

Two CLICK Starlink insert sizes available for poles with internal diameters of:

  1. 40mm (Hills Style) Metal Insert or,
  2. 38mm (Jonsa, Matchmaster Style)

Simply

  1. insert,
  2. tap down with a piece of wood and a hammer until flush,
  3. add a rivet (or tek screw) 60-65mm from top of insert to hold the insert in place, and
  4. CLICK in your Starlink dish!

A rivet should be used down the pole when insert is flush to fully secure the Click insert. You may use a tek screw, but be warned that sharp edges may damage the Starlink cable if you run the cable internally of the pole. MAKE SURE THE RIVET IS PLACED LOW ENOUGH TO NOT GET IN THE WAY OF THE DISH STEM. We recommend installing the rivet 60-65mm from the top of the pole.

The CLICK Metal Insert Starlink pipe adapter is an innovative solution that facilitates the installation of SpaceX’s Starlink satellite internet system in rural and remote areas. The CLICK Metal Insert pipe adapter is designed to enable easy mounting of the Starlink satellite dish on existing pipes or poles, thereby eliminating the need for additional infrastructure.

The Starlink satellite internet system is a project by SpaceX that aims to provide high-speed internet access to even the most remote regions of the world. The system consists of a constellation of low-Earth orbit (LEO) satellites that provide internet connectivity to ground-based terminals. The Starlink satellite dish, which is the user terminal, is a flat, circular device that measures approximately 23 inches in diameter and weighs around 12 pounds. The dish requires a clear view of the sky to establish a connection with the Starlink satellites, which are in constant motion.

The CLICK Metal Insert Starlink pipe adapter is a small, cylindrical device that measures approximately 10cm in length and 38mm in diameter. It is made of durable Aluminium and is designed to fit onto pipes or poles that have an internal diameter of 38mm. The adapter firmly attaches to the satellite mount with tek or rivets that can be used to secure the Starlink satellite dish onto the CLICK Metal Insert pipe adapter.

The installation process of the CLICK Metal Insert Starlink pipe adapter is relatively straightforward. The first step is to identify a suitable location for the satellite dish. The location should have a clear view of the sky and should be free from obstructions such as trees or buildings. Once the location is selected, the pipe adapter is attached to the pipe or pole using the mounting brackets. The Starlink satellite dish is then mounted onto the CLICK Metal Insert pipe adapter, and the cables are connected to the modem.

One of the key advantages of the CLICK Metal Insert Starlink pipe adapter is that it eliminates the need for additional infrastructure such as a tower or mast. This is particularly beneficial in rural and remote areas where access to such infrastructure may be limited. The CLICK Metal Insert pipe adapter allows the satellite dish to be mounted on existing infrastructure, which reduces the cost and time required for installation. This also means that the system can be easily relocated if necessary.

Another advantage of the CLICK Metal Insert Starlink pipe adapter is that it allows for greater flexibility in the installation process. The adapter can be used to mount the satellite dish on a variety of structures such as water towers, utility poles, and even trees. This makes it easier to find a suitable location for the satellite dish, which can improve the quality of the internet connection.

In conclusion, the CLICK Metal Insert Starlink pipe adapter is a simple yet effective solution that facilitates the installation of the Starlink satellite internet system. The adapter eliminates the need for additional infrastructure and provides greater flexibility in the installation process. It is an innovative solution that has the potential to revolutionize internet connectivity in rural and remote areas.

Additional information

Weight 2 kg
Dimensions 10 × 5 × 5 cm
Size (Pole Internal Diameter)

Size 1 (for internal pole diameter: 40mm, Hills Style), Size 2 (for internal pole diameter: 38mm, Jonsa, Matchmaster Style)

Reviews

There are no reviews yet.

Be the first to review “Installers Pack CLICK Insert – Pack of 5”

Your email address will not be published. Required fields are marked *