Starlink Click roof mount for a tiled roof with 2 metre pole. This is a universal mount where a slightly higher Starlink dish mount position is needed to avoid obstructions. Using 3mm alloy for the pole, this mount is strong enough to withstand almost anything. Custom cut for the Starlink dish makes this mount one of the strongest on the market.
Solid and professional mount with no drilling or damage to tiles. Main brackets attached to rafters underneath tiles.
If you require a bit of extra height for your Starlink dish, this Starlink Click roof mount for tiled roofs is ideal as it has a 2m extension as the main pole. In addition, the three points of contact add to the stability of the roof mount and installation is simple. The main pole comes with a custom made Starlink adaption to easily fit your dish the the Starlink roof mount. Made for Australian conditions.
– custom pole for Starlink Gen2***
– 2x telescopic sway arms
– base plate for pole
– z-brackets for under tile rafter fixing
– bag of bolts, teks and mini-teks for sway arms**
**Additional tek screws may be required
*** Side entry hole in the photos is for cable run example references only. This is not a pre-cut hole.
COURIER DELIVERY ONLY WITH FASTWAY
All items up to 1 metre will be sent via Australia Post (unless Aramex/Fastway is chosen on checkout). Australia post is the quickest option when it comes to delivery times. However, postage is limited to 1 metre max.
Items over 1 metre will be sent with Aramex/Fastway. In some regional areas, Fastway is limited to depot pickup only. Please check your address with Fastway if you have any delivery concerns. Fastway is a road-service only.